This is a modern way to create separated zones in the interior. It is lightweight and gives the interior a loft-style. Sold as a kit for self-assembly. Choose the width that suits your partition.

KIT CONTENTS:

Horizontal lamellas with holes
Vertical lamellas with holes
Fasteners
Wooden dowels
Cable protection caps
Installation guide

SPECIFICATIONS:

Single lamella dimension: 30x70mm (width x thickness)
Distance between lamellas: 50 mm
Strong MDF material profiles
Matte surface
Four-sided covering
Maximum height of the entire partition: 275 cm
Available in 26 different widths ranging from 51 to 251 cm
Color RAL7015

ADVANTAGES:

Ready-made kit – no additional processing required – all lamellas are cut to the dimensions specified in the order and pre-drilled with holes to ensure perfect spacing, making assembly very easy
Custom sizes – choose the appropriate width from 26 different options (51 to 251 cm), and enter the height during the order placement in the comments. The openwork partition height should be 0.5 cm lower than the room height.
Seamless edge veneer
Modern design

HOW TO INSTALL:

Arrange all elements on the floor.
Attach the vertical lamellas to the horizontal lamellas using screws. The two longer lamellas will be attached later.
Apply installation adhesive to the floor in the designated location.
Place the partition in the designated location and check the vertical position.
Then, drill holes for dowels in the upper lamella and the ceiling.
Attach the partition to the ceiling with dowels. (Dowels are not included in the kit)
Finally, attach the side lamellas with wooden dowels and glue.

ADDITIONAL INFORMATION:

The partition installation kit is a personalized product for the customer and is not eligible for returns.

The post Custom-Sized Divider – Ready for Assembly – Sand beige appeared first on Constore.

This is a modern way to create separated zones in the interior. It is lightweight and gives the interior a loft-style. Sold as a kit for self-assembly. Choose the width that suits your partition.

KIT CONTENTS:

Horizontal lamellas with holes
Vertical lamellas with holes
Fasteners
Wooden dowels
Cable protection caps
Installation guide

SPECIFICATIONS:

Single lamella dimension: 30x70mm (width x thickness)
Distance between lamellas: 50 mm
Strong MDF material profiles
Matte surface
Four-sided covering
Maximum height of the entire partition: 275 cm
Available in 26 different widths ranging from 51 to 251 cm

ADVANTAGES:

Ready-made kit – no additional processing required – all lamellas are cut to the dimensions specified in the order and pre-drilled with holes to ensure perfect spacing, making assembly very easy
Custom sizes – choose the appropriate width from 26 different options (51 to 251 cm), and enter the height during the order placement in the comments. The openwork partition height should be 0.5 cm lower than the room height.
Seamless edge veneer
Modern design

HOW TO INSTALL:

Arrange all elements on the floor.
Attach the vertical lamellas to the horizontal lamellas using screws. The two longer lamellas will be attached later.
Apply installation adhesive to the floor in the designated location.
Place the partition in the designated location and check the vertical position.
Then, drill holes for dowels in the upper lamella and the ceiling.
Attach the partition to the ceiling with dowels. (Dowels are not included in the kit)
Finally, attach the side lamellas with wooden dowels and glue.

ADDITIONAL INFORMATION:

The partition installation kit is a personalized product for the customer and is not eligible for returns.

The post Custom-Sized Divider – Ready for Assembly – European oak appeared first on Constore.

This is a modern way to create separated zones in the interior. It is lightweight and gives the interior a loft-style. Sold as a kit for self-assembly. Choose the width that suits your partition.

KIT CONTENTS:

Horizontal lamellas with holes
Vertical lamellas with holes
Fasteners
Wooden dowels
Cable protection caps
Installation guide

SPECIFICATIONS:

Single lamella dimension: 30x70mm (width x thickness)
Distance between lamellas: 50 mm
Strong MDF material profiles
Matte surface
Four-sided covering
Maximum height of the entire partition: 275 cm
Available in 26 different widths ranging from 51 to 251 cm
Color RAL7015

ADVANTAGES:

Ready-made kit – no additional processing required – all lamellas are cut to the dimensions specified in the order and pre-drilled with holes to ensure perfect spacing, making assembly very easy
Custom sizes – choose the appropriate width from 26 different options (51 to 251 cm), and enter the height during the order placement in the comments. The openwork partition height should be 0.5 cm lower than the room height.
Seamless edge veneer
Modern design

HOW TO INSTALL:

Arrange all elements on the floor.
Attach the vertical lamellas to the horizontal lamellas using screws. The two longer lamellas will be attached later.
Apply installation adhesive to the floor in the designated location.
Place the partition in the designated location and check the vertical position.
Then, drill holes for dowels in the upper lamella and the ceiling.
Attach the partition to the ceiling with dowels. (Dowels are not included in the kit)
Finally, attach the side lamellas with wooden dowels and glue.

ADDITIONAL INFORMATION:

The partition installation kit is a personalized product for the customer and is not eligible for returns.

The post Custom-Sized Divider – Ready for Assembly – Grafit appeared first on Constore.

This is a modern way to create separated zones in the interior. It is lightweight and gives the interior a loft-style. Sold as a kit for self-assembly. Choose the width that suits your partition.

KIT CONTENTS:

Horizontal lamellas with holes
Vertical lamellas with holes
Fasteners
Wooden dowels
Cable protection caps
Installation guide

SPECIFICATIONS:

Single lamella dimension: 30x70mm (width x thickness)
Distance between lamellas: 50 mm
Strong MDF material profiles
Matte surface
Four-sided covering
Maximum height of the entire partition: 275 cm
Available in 26 different widths ranging from 51 to 251 cm

ADVANTAGES:

Ready-made kit – no additional processing required – all lamellas are cut to the dimensions specified in the order and pre-drilled with holes to ensure perfect spacing, making assembly very easy
Custom sizes – choose the appropriate width from 26 different options (51 to 251 cm), and enter the height during the order placement in the comments. The openwork partition height should be 0.5 cm lower than the room height.
Seamless edge veneer
Modern design

HOW TO INSTALL:

Arrange all elements on the floor.
Attach the vertical lamellas to the horizontal lamellas using screws. The two longer lamellas will be attached later.
Apply installation adhesive to the floor in the designated location.
Place the partition in the designated location and check the vertical position.
Then, drill holes for dowels in the upper lamella and the ceiling.
Attach the partition to the ceiling with dowels. (Dowels are not included in the kit)
Finally, attach the side lamellas with wooden dowels and glue.

ADDITIONAL INFORMATION:

The partition installation kit is a personalized product for the customer and is not eligible for returns.

The post Custom-Sized Divider – Ready for Assembly – Matte white appeared first on Constore.

This is a modern way to create separated zones in the interior. It is lightweight and gives the interior a loft-style. Sold as a kit for self-assembly. Choose the width that suits your partition.

KIT CONTENTS:

Horizontal lamellas with holes
Vertical lamellas with holes
Fasteners
Wooden dowels
Cable protection caps
Installation guide

SPECIFICATIONS:

Single lamella dimension: 30x70mm (width x thickness)
Distance between lamellas: 50 mm
Strong MDF material profiles
Matte surface
Four-sided covering
Maximum height of the entire partition: 275 cm
Available in 26 different widths ranging from 51 to 251 cm

ADVANTAGES:

Ready-made kit – no additional processing required – all lamellas are cut to the dimensions specified in the order and pre-drilled with holes to ensure perfect spacing, making assembly very easy
Custom sizes – choose the appropriate width from 26 different options (51 to 251 cm), and enter the height during the order placement in the comments. The openwork partition height should be 0.5 cm lower than the room height.
Seamless edge veneer
Modern design

HOW TO INSTALL:

Arrange all elements on the floor.
Attach the vertical lamellas to the horizontal lamellas using screws. The two longer lamellas will be attached later.
Apply installation adhesive to the floor in the designated location.
Place the partition in the designated location and check the vertical position.
Then, drill holes for dowels in the upper lamella and the ceiling.
Attach the partition to the ceiling with dowels. (Dowels are not included in the kit)
Finally, attach the side lamellas with wooden dowels and glue.

ADDITIONAL INFORMATION:

The partition installation kit is a personalized product for the customer and is not eligible for returns.

The post Custom-Sized Divider – Ready for Assembly – Oak veneer appeared first on Constore.

This is a modern way to create separated zones in the interior. It is lightweight and gives the interior a loft-style. Sold as a kit for self-assembly. Choose the width that suits your partition.

KIT CONTENTS:

Horizontal lamellas with holes
Vertical lamellas with holes
Fasteners
Wooden dowels
Cable protection caps
Installation guide

SPECIFICATIONS:

Single lamella dimension: 30x70mm (width x thickness)
Distance between lamellas: 50 mm
Strong MDF material profiles
Matte surface
Four-sided covering
Maximum height of the entire partition: 275 cm
Available in 26 different widths ranging from 51 to 251 cm

ADVANTAGES:

Ready-made kit – no additional processing required – all lamellas are cut to the dimensions specified in the order and pre-drilled with holes to ensure perfect spacing, making assembly very easy
Custom sizes – choose the appropriate width from 26 different options (51 to 251 cm), and enter the height during the order placement in the comments. The openwork partition height should be 0.5 cm lower than the room height.
Seamless edge veneer
Modern design

HOW TO INSTALL:

Arrange all elements on the floor.
Attach the vertical lamellas to the horizontal lamellas using screws. The two longer lamellas will be attached later.
Apply installation adhesive to the floor in the designated location.
Place the partition in the designated location and check the vertical position.
Then, drill holes for dowels in the upper lamella and the ceiling.
Attach the partition to the ceiling with dowels. (Dowels are not included in the kit)
Finally, attach the side lamellas with wooden dowels and glue.

ADDITIONAL INFORMATION:

The partition installation kit is a personalized product for the customer and is not eligible for returns.

The post Custom-Sized Divider – Ready for Assembly – Sonoma oak appeared first on Constore.

This is a modern way to create separated zones in the interior. It is lightweight and gives the interior a loft-style. Sold as a kit for self-assembly. Choose the width that suits your partition.

KIT CONTENTS:

Horizontal lamellas with holes
Vertical lamellas with holes
Fasteners
Wooden dowels
Cable protection caps
Installation guide

SPECIFICATIONS:

Single lamella dimension: 30x70mm (width x thickness)
Distance between lamellas: 50 mm
Strong MDF material profiles
Matte surface
Four-sided covering
Maximum height of the entire partition: 275 cm
Available in 26 different widths ranging from 51 to 251 cm

ADVANTAGES:

Ready-made kit – no additional processing required – all lamellas are cut to the dimensions specified in the order and pre-drilled with holes to ensure perfect spacing, making assembly very easy
Custom sizes – choose the appropriate width from 26 different options (51 to 251 cm), and enter the height during the order placement in the comments. The openwork partition height should be 0.5 cm lower than the room height.
Seamless edge veneer
Modern design

HOW TO INSTALL:

Arrange all elements on the floor.
Attach the vertical lamellas to the horizontal lamellas using screws. The two longer lamellas will be attached later.
Apply installation adhesive to the floor in the designated location.
Place the partition in the designated location and check the vertical position.
Then, drill holes for dowels in the upper lamella and the ceiling.
Attach the partition to the ceiling with dowels. (Dowels are not included in the kit)
Finally, attach the side lamellas with wooden dowels and glue.

ADDITIONAL INFORMATION:

The partition installation kit is a personalized product for the customer and is not eligible for returns.

The post Custom-Sized Divider – Ready for Assembly – Wotan oak appeared first on Constore.

This is a modern way to create separated zones in the interior. It is lightweight and gives the interior a loft-style. Sold as a kit for self-assembly. Choose the width that suits your partition.

KIT CONTENTS:

Horizontal lamellas with holes
Vertical lamellas with holes
Fasteners
Wooden dowels
Cable protection caps
Installation guide

SPECIFICATIONS:

Single lamella dimension: 30x70mm (width x thickness)
Distance between lamellas: 50 mm
Strong MDF material profiles
Matte surface
Four-sided covering
Maximum height of the entire partition: 275 cm
Available in 26 different widths ranging from 51 to 251 cm

ADVANTAGES:

Ready-made kit – no additional processing required – all lamellas are cut to the dimensions specified in the order and pre-drilled with holes to ensure perfect spacing, making assembly very easy
Custom sizes – choose the appropriate width from 26 different options (51 to 251 cm), and enter the height during the order placement in the comments. The openwork partition height should be 0.5 cm lower than the room height.
Seamless edge veneer
Modern design

HOW TO INSTALL:

Arrange all elements on the floor.
Attach the vertical lamellas to the horizontal lamellas using screws. The two longer lamellas will be attached later.
Apply installation adhesive to the floor in the designated location.
Place the partition in the designated location and check the vertical position.
Then, drill holes for dowels in the upper lamella and the ceiling.
Attach the partition to the ceiling with dowels. (Dowels are not included in the kit)
Finally, attach the side lamellas with wooden dowels and glue.

ADDITIONAL INFORMATION:

The partition installation kit is a personalized product for the customer and is not eligible for returns.

The post Custom-Sized Divider – Ready for Assembly – Natural oak appeared first on Constore.

This is a modern way to create separated zones in the interior. It is lightweight and gives the interior a loft-style. Sold as a kit for self-assembly. Choose the width that suits your partition.

KIT CONTENTS:

Horizontal lamellas with holes
Vertical lamellas with holes
Fasteners
Wooden dowels
Cable protection caps
Installation guide

SPECIFICATIONS:

Single lamella dimension: 30x70mm (width x thickness)
Distance between lamellas: 50 mm
Strong MDF material profiles
Matte surface
Four-sided covering
Maximum height of the entire partition: 275 cm
Available in 26 different widths ranging from 51 to 251 cm

ADVANTAGES:

Ready-made kit – no additional processing required – all lamellas are cut to the dimensions specified in the order and pre-drilled with holes to ensure perfect spacing, making assembly very easy
Custom sizes – choose the appropriate width from 26 different options (51 to 251 cm), and enter the height during the order placement in the comments. The openwork partition height should be 0.5 cm lower than the room height.
Seamless edge veneer
Modern design

HOW TO INSTALL:

Arrange all elements on the floor.
Attach the vertical lamellas to the horizontal lamellas using screws. The two longer lamellas will be attached later.
Apply installation adhesive to the floor in the designated location.
Place the partition in the designated location and check the vertical position.
Then, drill holes for dowels in the upper lamella and the ceiling.
Attach the partition to the ceiling with dowels. (Dowels are not included in the kit)
Finally, attach the side lamellas with wooden dowels and glue.

ADDITIONAL INFORMATION:

The partition installation kit is a personalized product for the customer and is not eligible for returns.

The post Custom-Sized Divider – Ready for Assembly – Classic walnut appeared first on Constore.

This is a modern way to create separated zones in the interior. It is lightweight, and the black color of the lamellas gives the interior a loft-style. Sold as a kit for self-assembly. Choose the width that suits your partition.

KIT CONTENTS:

Horizontal lamellas with holes
Vertical lamellas with holes
Fasteners
Wooden dowels
Cable protection caps
Installation guide

SPECIFICATIONS:

Single lamella dimension: 30x70mm (width x thickness)
Distance between lamellas: 50 mm
Strong MDF material profiles
Matte surface
Four-sided covering
Maximum height of the entire partition: 275 cm
Available in 26 different widths ranging from 51 to 251 cm
Color RAL 790-4

ADVANTAGES:

Ready-made kit – no additional processing required – all lamellas are cut to the dimensions specified in the order and pre-drilled with holes to ensure perfect spacing, making assembly very easy
Custom sizes – choose the appropriate width from 26 different options (51 to 251 cm), and enter the height during the order placement in the comments. The openwork partition height should be 0.5 cm lower than the room height.
Seamless edge veneer
Modern design

HOW TO INSTALL:

Arrange all elements on the floor.
Attach the vertical lamellas to the horizontal lamellas using screws. The two longer lamellas will be attached later.
Apply installation adhesive to the floor in the designated location.
Place the partition in the designated location and check the vertical position.
Then, drill holes for dowels in the upper lamella and the ceiling.
Attach the partition to the ceiling with dowels. (Dowels are not included in the kit)
Finally, attach the side lamellas with wooden dowels and glue.

ADDITIONAL INFORMATION:

The partition installation kit is a personalized product for the customer and is not eligible for returns.

The post Custom-Sized Divider – Ready for Assembly – Matte Black appeared first on Constore.