Partition – Ready for Assembly<\/p>\n
This is a modern way to create separated zones in the interior. It is lightweight and gives the interior a loft-style. Sold as a kit for self-assembly. Choose the width that suits your partition.<\/p>\n
KIT CONTENTS:<\/p>\n
Horizontal lamellas with holes
\nVertical lamellas with holes
\nFasteners
\nWooden dowels
\nCable protection caps
\nInstallation guide<\/p>\n
SPECIFICATIONS:<\/p>\n
Single lamella dimension: 30x70mm (width x thickness)
\nDistance between lamellas: 50 mm
\nStrong MDF material profiles
\nMatte surface
\nFour-sided covering
\nMaximum height of the entire partition: 275 cm
\nAvailable in 26 different widths ranging from 51 to 251 cm
\nColor RAL7015<\/p>\n
ADVANTAGES:<\/p>\n
Ready-made kit – no additional processing required – all lamellas are cut to the dimensions specified in the order and pre-drilled with holes to ensure perfect spacing, making assembly very easy
\nCustom sizes – choose the appropriate width from 26 different options (51 to 251 cm), and enter the height during the order placement in the comments. The openwork partition height should be 0.5 cm lower than the room height.
\nSeamless edge veneer
\nModern design<\/p>\n
HOW TO INSTALL:<\/p>\n
Arrange all elements on the floor.
\nAttach the vertical lamellas to the horizontal lamellas using screws. The two longer lamellas will be attached later.
\nApply installation adhesive to the floor in the designated location.
\nPlace the partition in the designated location and check the vertical position.
\nThen, drill holes for dowels in the upper lamella and the ceiling.
\nAttach the partition to the ceiling with dowels. (Dowels are not included in the kit)
\nFinally, attach the side lamellas with wooden dowels and glue.<\/p>\n
ADDITIONAL INFORMATION:<\/p>\n
The partition installation kit is a personalized product for the customer and is not eligible for returns.<\/p>","protected":false},"excerpt":{"rendered":"